Mooney M20F

1,122 parts applicable to this airframe — ga_single

Part NumberStatus
01-07790623-10OEM
01-07790623-20OEM
115-00345-00OEM
310240-003OEM
310240-004OEM
310240-005OEM
310240-006OEM
310240-007OEM
310240-008OEM
310240-009OEM
310240-010OEM
310240-3OEM
310240-4OEM
310240-5OEM
310240-6OEM
340121-005OEM
340121-005OEM
340121-009OEM
340121-009OEM
340121-009 340121-919 340121-929 340285-037OEM
340121-009 340121-919 340121-929 340285-037OEM
340121-021OEM
340121-11 OR 340151-21OEM
340121-21OEM
340121-3OEM
340121-3OEM
340121-4OEM
340121-4OEM
340121-5OEM
340121-5OEM
340121-919OEM
340121-919OEM
340285-033OEM
340285-034OEM
340285-039OEM
340285-039 OR 340285-63OEM
340285-057OEM
340285-058OEM
340285-061OEM
340285-061OEM
340285-063OEM
540010-501 540010-001 520003-3OEM
540010-501 540010-001 520003-3OEM
GNS430 BackplateOEM
GNS430 Tray 011-00676-00OEM
GNS530 BackplateOEM
GNS530 Tray 011-00671-00OEM
LLC P/N VWS-101OEM
Mooney (Donaldson) P10-4056OEM
Mooney (Donaldson) P10-4056OEM

Airworthiness Directive activity

FAA / EASA public regulatory data

1airworthiness directives affecting this fleet — recurring compliance demand for the parts and shops that serve it
Most recent
  • FAA AD 2023-02-04effective Feb 13, 2023Prohibition

    The FAA is adopting a new airworthiness directive (AD) for certain Mooney International Corporation Model M20C, M20D, M20E, M20F, and M20G airplanes. This AD was prompted by reports of the hybrid material elevator balance weight cracking. This AD requires inspecting to determine whether a certain elevator balance weight is installed. If installed, this AD requires inspecting each affected elevator balance weight for corrosion and cracking, and depending on the findings, either replacing each affected elevator balance weight with a non- hybrid (lead) elevator balance weight or repetitively inspecting each affected elevator balance weight. This AD also prohibits the installation of an affected elevator balance weight on any airplane. The FAA is issuing this AD to address the unsafe condition on these products.

Directives linked to this airframe family in the FAA / EASA regulatory corpus we have processed — not a complete historical AD list. An AD is a compliance requirement that drives scheduled work (inspections, replacements, modifications) across the fleet; inspection directives are not replacement directives, and none of this is a prediction that any part will fail.