Mooney M20F

1,122 parts applicable to this airframe — ga_single

Part NumberStatus
135.250PMA
136.250PMA
139.275PMA
151.250PMA
152250OEM
153.250PMA
154.250PMA
563.250PMA
564.250PMA
565.250PMA
566.250PMA
574.250PMA
577.250PMA
582.250PMA
583.250PMA
584.250PMA
585.250PMA
586.250PMA
AK967-2010, -2030, -2031, -2050, -2051PMA
HRJ0114, HRJ0115PMA
In Accordance With Mdl No. 900S002A/FPMA
MDL 5000E-9, 23-501-05-2 and MDL 5000E-11, 1U149-007-1PMA
MP-1200-88APMA
MP-3700-87APMA
MP-3800-87APMA
MP-4100-87APMA
MP-4300-87APMA
MW1008-900PMA
MW1008-901PMA
MW1008-903PMA
MW1008-910PMA
MW1081-101PMA
MW1081-205PMA
MW1081-301PMA
MW560011-000PMA
MW560194-000PMA
P100030-431-00PMA
P312R as described in National Airparts Inc., Manual No. ALT4COV1.SAMPMA
P324RM and P324RNPMA
R15300PMA
RA20AOEM
RA30EPMA
RA40APMA
W-, W/T-, W/G-2117, W-, W/T-, W/G-2117-187PMA
W-, W/T-, W/G-2166, W-, W/T-, W/G-2166-187PMA
W-, W/T-, W/G-2168 -RH or -LH, W-, W/T-, W/G-2168-187 -RH or -LHPMA
W-2129 W/T-2129 W/G-2129PMA
W-2167 W/T-2167 W/G-2167 W-2167-250 W/T-2167-250 W/G-2167-250PMA
W-2169 W/T-2169 W/G-2169PMA
W/G-2209-250, W-2209, W/T-2209, W/G-2209, W-2209-250, W/T-2209-250PMA

Airworthiness Directive activity

FAA / EASA public regulatory data

1airworthiness directives affecting this fleet — recurring compliance demand for the parts and shops that serve it
Most recent
  • FAA AD 2023-02-04effective Feb 13, 2023Prohibition

    The FAA is adopting a new airworthiness directive (AD) for certain Mooney International Corporation Model M20C, M20D, M20E, M20F, and M20G airplanes. This AD was prompted by reports of the hybrid material elevator balance weight cracking. This AD requires inspecting to determine whether a certain elevator balance weight is installed. If installed, this AD requires inspecting each affected elevator balance weight for corrosion and cracking, and depending on the findings, either replacing each affected elevator balance weight with a non- hybrid (lead) elevator balance weight or repetitively inspecting each affected elevator balance weight. This AD also prohibits the installation of an affected elevator balance weight on any airplane. The FAA is issuing this AD to address the unsafe condition on these products.

Directives linked to this airframe family in the FAA / EASA regulatory corpus we have processed — not a complete historical AD list. An AD is a compliance requirement that drives scheduled work (inspections, replacements, modifications) across the fleet; inspection directives are not replacement directives, and none of this is a prediction that any part will fail.