Mooney M20C

1,122 parts applicable to this airframe — ga_single

Part NumberStatus
0025-5100PMA
063-01200-OAAPMA
100, 100.250PMA
101, 101.250PMA
102, 102.250PMA
12225310A
135, 135.250PMA
136, 136.187, 136.250PMA
137, 137.187, 137.250PMA
138, 138.187, 138.250PMA
139PMA
156, 156.250PMA
500-1001, ADS1200-201PMA
574, 574.250PMA
577, 577.250PMA
580
581PMA
700-00188-XXXPMA
9100-001- E, F, G, HPMA
AS101-503PMA
AS101-505PMA
B-00403-1PMA
CB201IPMA
CRB6457 CRB122253PMA
L025-914007-001-005ABPMA
L025-914007-002-005ABPMA
L880012-501PMA
LA146355-1APMA
LA146355-2APMA
LS03-01004PMA
LSM-500-007PMA
LSM-500-058PMA
NL21414VPMA
NL21414VALTPMA
NL21428VPMA
NL21428VALTPMA
NL31814VALTPMA
NL31828VPMA
NL31828VALTPMA
PSF100A-T1.0PMA
RA066-10500OEM
RA066-10500-4KOEM
RA105-00200PMA
RMY-300-1PMA
ST-745-20/30PMA
ST-746PMA
UREM37HEPMA
URHM38SEPMA
VFS101PMA
VWS-100PMA

Airworthiness Directive activity

FAA / EASA public regulatory data

1airworthiness directives affecting this fleet — recurring compliance demand for the parts and shops that serve it
Most recent
  • FAA AD 2023-02-04effective Feb 13, 2023Prohibition

    The FAA is adopting a new airworthiness directive (AD) for certain Mooney International Corporation Model M20C, M20D, M20E, M20F, and M20G airplanes. This AD was prompted by reports of the hybrid material elevator balance weight cracking. This AD requires inspecting to determine whether a certain elevator balance weight is installed. If installed, this AD requires inspecting each affected elevator balance weight for corrosion and cracking, and depending on the findings, either replacing each affected elevator balance weight with a non- hybrid (lead) elevator balance weight or repetitively inspecting each affected elevator balance weight. This AD also prohibits the installation of an affected elevator balance weight on any airplane. The FAA is issuing this AD to address the unsafe condition on these products.

Directives linked to this airframe family in the FAA / EASA regulatory corpus we have processed — not a complete historical AD list. An AD is a compliance requirement that drives scheduled work (inspections, replacements, modifications) across the fleet; inspection directives are not replacement directives, and none of this is a prediction that any part will fail.