Boeing 777-300ER

The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 747-8 and -8F series airplanes and Model 777- 200, -200LR, -300, -300ER, and 777F series airplanes. This AD was prompted by the determination that radio altimeters cannot be relied upon to perform their intended function if they experience interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G Lower C-Band) while operating in Canadian airspace, and the determination that this interference may affect multiple other airplane systems using radio altimeter data, including the pitch control laws, including those that provide tail strike protection, regardless of the approach type or weather. This AD requires revising the existing airplane flight manual (AFM) to incorporate limitations prohibiting certain operations requiring radio altimeter data when operating in Canadian airspace. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-200LR and -300ER series airplanes. This AD was prompted by reports of chafing and arcing damage on the light emitting diode (LED) sidewall wire bundles. This AD requires a general visual inspection (GVI) of the sidewall light for chafing damage and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is superseding Airworthiness Directive (AD) 2022-15- 06, which applied to all The Boeing Company Model 777-200, -200LR, - 300, -300ER, and 777F series airplanes. AD 2022-15-06 required disconnecting certain connectors and capping and stowing the wires that had been attached to the affected transorb modules. Since the FAA issued AD 2022-15-06, the agency has determined additional connectors are affected. Also, a replacement has been developed to address the unsafe condition, which would terminate the existing actions. This AD continues to require the actions specified in AD 2022-15-06 and requires those actions for additional connectors. This AD also requires determining if affected transorb modules are installed, replacing or testing affected transorb modules, and applicable on-condition actions. This AD also prohibits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is superseding Airworthiness Directive (AD) 2024-15- 03, which applied to all The Boeing Company Model 777 airplanes. AD 2024-15-03 required identifying the part number, and the serial number if applicable, of the Captain's and First Officer's seats and applicable on-condition actions for affected seats. AD 2024-15-03 also required a one-time detailed inspection and repetitive checks of the horizontal movement system (HMS) for the Captain's and First Officer's seats and applicable on-condition actions. Since the FAA issued AD 2024-15-03, the FAA determined that AD 2024-15-03 contains an error when providing conditions for taking credit using a previous revision of the service information. This AD requires the actions of AD 2024-15-03 and revises paragraph (j) of this AD to clarify which actions are not required. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is superseding Airworthiness Directive (AD) 2012-07- 06, which applied to certain The Boeing Company Model 777-200, -200LR, -300, -300ER, and 777F series airplanes. AD 2012-07-06 required revising the maintenance program to update inspection requirements to detect fatigue cracking of principal structural elements (PSEs). This AD was prompted by new revisions to the airworthiness limitations of the maintenance planning document and damage tolerance rating check form document. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.